Overview:
MBS-SAM9G15 SBC board operates at up to 400MHz,with 256 Mbytes NandFash ,128MB DDR II,4MB serial DataFlash and 64KB serial EEPROM. It supports Linux ,and offer angstrom and android-2.3.5_r1 test .The board provides a wide range of peripherals, including a high-speed USB2.0 port(480MHz), an Ethernet 10/100 interface, audio interface, a JTAG debug port,Micro SD card interface,SD/MMC card interface, CMOS camera interface.It supports video data collection.
硬件特征:
CPU单元:
Processor AT91SAM9G15
CPU Module Size:67mm*34mm
12MHz crystal oscillator
32.768MHz crystal oscillator
128MB DDR2 memory
256MB nandflash memory with chip selection control switch
4MB SPI Serial dataflash with chip selection control switch
64KB EEPROM
256B 1-wire EEPROM
On-board power regulation
Two user LEDs
For PHY,thFor PHY,this depnds on our manufacture for different batch.If you need to confirm, pls mail to Sales.arm@embest-tech.com
SDIOIMM200 card edge interface
底板特点:
The MBM-SAM-9X Base Board is a common main board to connect 9m10 CPU Module & 9x5 CPU Module.
Base Board Size:181mm*165mm
Supply Voltage:5V DC
Supply Current:2A
Temperature Range:0~70℃
ONE WIRE EPPROM(1024-bit);
1×JTAG Interface;
1×Camera Interface(9M10 and 9G25);
2×24 bit LCD Interface(Resistive Touch Panel);
1×DBGU Interface(3-wire);
2×UART Serial Port(1×5-wire、1×3-wire);
2×10/100Mb Ethernet Interface(CPU Module and base board each have a PHY chip);
2×RS485 Interface;
2×CAN Bus Interface;
1×Smart DAA interface;
2×USB 2.0 Host Interface;
1×USB High-Speed USB2.0 OTG Interface;
4×touch buttons(QTOUCH);
2×physical buttons(reset,wakeup);
1×Micro SD Interface;
1×SD card Interface;
3×user LED;
1×Analog Output (connected to speaker by default)
1×Analog Input(connected to potentiometer by default)
1×RTC Unit (without battery);
50 GPIO User Extension Interface
软件特征:
NO. | Example Programs |
1 | adc_touchscreen |
2 | adc_touchscreen |
3 | dma |
4 | lcd |
5 | getting-started |
6 | periph_protect |
7 | pmc_clock_switching |
8 | pwm |
9 | qtouch |
10 | smc_psram |
11 | spi_slave |
12 | ssc_dma_audio |
13 | sysc |
14 | tc_capture_waveform |
15 | twi_eeprom |
16 | twi_slave |
17 | usart_hw_handshaking |
18 | usart_serial |
19 | usart_spi |
20 | usart_synchronous |
21 | hsmci_multimedia_card |
22 | hsmci_sdcard |
23 | hsmci_sdio |
24 | smc_nandflash |
25 | spi_serialflash |
26 | usb_audio_looprec |
27 | usb_cdc_serial |
28 | usb_core |
29 | usb_hid_keyboard |
30 | usb_hid_mouse |
31 | usb_hid_msd |
32 | usb_hid_tansfer |
33 | usb_iad_cdc_cdc |
34 | usb_iad_cdc_hid |
35 | usb_iad_cdc_msd |
36 | usb_masstorage |
Linux软件表:
Type | function | Desciprion |
Bootloader | AT91Bootstrap | Guide to Uboot |
Uboot | 1.Support NandFlash to erase,read and write 2. Support net to download Image 3.Support to set and keep environment variables 4.Support memory to appear , compare and modify 5. Support boot and bootargsto set |
Kernel | Serial driver | USART0 |
DBGU |
USB | USB_HOST*2 |
USB_OTG |
SD card driver | Micro SD |
SD Card |
SMD driver |
LCD+Touch |
Zigbee driver |
SPI driver |
TWI driver |
Qtouch key driver |
DMA driver |
GPIO driver |
File system | Angstrom file system |
Android file system |